Steinert metal detectors have been protecting expensive downstream equipment from metallic contaminants for over 30 years.
EASE OF SETUP & USE
Complete programming is accomplished by turning dials on the control panel.
RELIABLE & SIMPLE OPERATION
Solid-state IC’s ensure long operating life and trouble-free service. Resident diagnostic monitor uses LED’s to indicate the operation status of the circuit. Pulsed field operation requires no balancing or tuning and is not affected by temperature or humidity
The Sentinel Plus model simply detects any metals while the Sentinel Pro is able to distinguish between magnetic and non-magnetic metals; this is especially important when combined with magnets or other separation devices.
AUTOMATIC SPLICE DETECTION
Circuitry has been designed for automatic splice protection (ASP).
STEEL CORE BELTS
Tramp metal can be detected on standard and steel core belts.
Coil units are made of monolithic, reinforced, high-impact resistant fibreglass to withstand damage. Additionally the receiver coil swings away when impacted by overburden or large lumps.
Steinert metal detection is ideal for detecting tramp in almost all bulk material handling applications including: ores, aggregates, coal, rubber, iron pellets, wood chips and many more.
Even highly mineralised ore has a much lower conductivity than refined metal, therefore both magnetic and non-magnetic metals are efficiently detected.
The electrical conductivity of materials conveyed through the detector sensor area are measured by detecting variations in pulsed electronic field. Since magnetic and conductive properties of any material are independent, both magnetic and non-magnetic metals are detected and can be distinguished from each other.
As metal detectors interrupt production by stopping the conveyor while an operator removes the tramp metal, they are usually combined with magnets. Magnets remove ferrous tramp metal and therefore reduce production interruptions from the metal detector. Magnets and Metal Detectors can be combined in various ways to optimise protection and production up-time.
FLAG DROP MARKER
PAINT SPRAY MARKER
VISUAL & AUDIBLE ALARM
MAGNET ACTIVATION CIRCUIT
CLIP DECTECTOR TO IGNORE METAL FLEXCO TYPE BELT JOINERS
PULSE WHEEL ENCODER TO PROVIDE DISTANCE TO TRAMP METAL
450 - 2,400mm
0.3 - 6m/s
IP66, Stainless Steel
Sentinel Plus - Detects all metals
Sentinel Pro - Can distinguish between magnetic and non-magnetic metals